Rachnera Nendoroid

Rachnera Nendoroid
Rachnera Nendoroid_image Made of: Resin
From: Monster Musume no Iru Nichijou

Here are all the WIP images of my Rachnera Nendoroid.

I modeled up the spider body assembly of Rachnera in Solidworks. Sadly I couldn’t figure out how to design the body on the computer so I had to make a copy of an existing nendoroid I have and had to heavily modify the body to work for what I needed.

The following is how much resin it takes for each part:

  • Hair (front): .220 oz
  • Hair (back): .560 oz
  • Face plate (standard): .280 oz
  • Human body:
  • Arms (crossed):
  • Spider body (thorax?):
  • Abdomen:
  • Upper spider leg:
  • Middle spider leg: .070oz (each)
  • Lower spider leg: .220 oz (each)
  • Small spider leg: .080 oz (pair)
  • Loin cloth:

The following is a list of ball joints needed to make one figure:

  • 8: 8mm ball joint
  • 16: 6mm ball joint
  • 1: 4mm ball joint

After making my initial molds of the major parts I came to the realization that I needed to remake them because they all had defects after casting the parts. These mostly consisted of small print lines that I missed in the initial mold pour. I also didn’t cast the peg holes. Which was a huge mistake because I would have to manually drill all the holes on all the parts, and I know after doing it a few 16 times that I was not going to be able to keep the quality of the holes consistent like I would like. So make new and updated molds is the best step.