This is a list of tools and materials that I use, but that doesn’t mean they are what everyone should use. You can use whichever brand you prefer. :3
Mold making:
- Clay modeling tools
- Soft sulfur free clay
- Mold box materials (cardboard, 3D printed mold boxes, acrylic sheets, etc)
- Vacuum pump (single stage or double stage)
- Vacuum chamber (1.5 gal, 3 gal, or 5 gal)
- Tin cure silicone (Magikmold 28, Mold max 25, 30)
- Measuring cups (8 oz, 32 oz, etc)
- Mr. Silicone barrier
- 3 gal 100 PSI air compressor
- 2.5 gal Pressure pot
- Digital scale
Model making/casting:
- God Hand SPN-120 Nippers
- God Hand BLN-120 Nippers
- God Hand GH-PB-98ST power pin vise
- God Hand GH-SB-1-3 spin blade set
- Sandpaper: 400, 500, 1000, 1200 grit
- Dremel 8050
- Dremel 628-01 drill bit set
- Dremel rotary drill bits
- Smooth-on cast 300
- Alumilite cast resin
- Alumilite Dye
- Tamiya putty
- Modo MK-21 (poly putty)
- Modo MK-22 (two part poly putty)
- Measuring cups
Model painting:
- Air compressor
- Single action airbrush
- Dual action airbrush
- 3 gal 100 PSI air compressor
- Vallejo acrylic paints
- Mr. Color lacquer paints
- Mr. Hobby lacquer thinner
- Airbrush cleaner
3D printing
FDM:
- Creality CR-10S
- Creality Ender 3
- Geeetech A30
- Monoprice Mini Select V2
- Monoprice Select V2 (I no longer use this printer because the print bed would always deform if too much pressure on the springs)
SLA/LCD:
- Phrozen Shuffle XL (LCD)
- Kudo Bean (LCD)
- Sparkmaker FHD (LCD)
- Dazz3D Pro (LCD)
